ชุดสวิตซ์รีโมทไร้สายพร้อมกล่อง แบบกดติดปล่อยดับ ควบคุม Relay เปิด/ปิด อุปกรณ์ไฟฟ้า ใช้ไฟเลี้ยง 12V สวิทซ์รีโมทไร้สา

Specification :

• Operating voltage: DC12V
• Receiver board itself supply current: 0.5A ~ 2A
• Working frequency: 315MHZ
• Contact capacity: ≤ 10A / 250VAC; 10A / 30VDC
• Receiver sensitivity:> - 105dB
• Remote control distance: 100 meters (open space without interference), this distance is open to the interference of the theoretical distance,
• The use will be based on different environmental interference and the wall has been reduced.
• Control Relay: 1 way normally open (normally closed) contacts
• Encoding type: learning code;
• Learning method: turn on the power indicator light for 3 seconds, the indicator goes out once press the learning button, then the light is on, press the remote control button light off, learning success.
• Clear code : turn on the power indicator light for 3 seconds, press and hold the learning button while the indicator light is lit, 8 seconds after the light is off, clear the success.
• Working mode: self-locking / interlocking / jogging user free choice. (Cap selection, T for the self-locking type, M for the jog type, M and T are not inserted for interlocking type)
• Self-locking / interlocking / jogging meaning Explanation:
• Interlock: hand press the corresponding remote control key, the corresponding relay connected, then press the other remote control key; relay disconnect.
• Non-lock / jog: press the remote control key, the corresponding relay connected, release the remote control key; the corresponding relay disconnected.
• Self-locking: press the remote control button once, the relay is connected, press the remote control button again, the relay is disconnected.
• T point up the pattern is self-locking, the L point up mode is interlocked, if T and L are not linked to the move