Multi Function Time Relay XY-WJ01 โมดูลตั้งเวลาเปิดปิดพร้อมรีเลย์ สต็อกไทยส่งไว

Multi Function Time Relay XY-WJ01 โมดูลตั้งเวลาเปิดปิดพร้อมรีเลย์ สต็อกไทยส่งไว
Multi Function Time Relay XY-WJ01 โมดูลตั้งเวลาเปิดปิดพร้อมรีเลย์ สต็อกไทยส่งไวMulti Function Time Relay XY-WJ01 โมดูลตั้งเวลาเปิดปิดพร้อมรีเลย์ สต็อกไทยส่งไวMulti Function Time Relay XY-WJ01 โมดูลตั้งเวลาเปิดปิดพร้อมรีเลย์ สต็อกไทยส่งไวMulti Function Time Relay XY-WJ01 โมดูลตั้งเวลาเปิดปิดพร้อมรีเลย์ สต็อกไทยส่งไวMulti Function Time Relay XY-WJ01 โมดูลตั้งเวลาเปิดปิดพร้อมรีเลย์ สต็อกไทยส่งไวMulti Function Time Relay XY-WJ01 โมดูลตั้งเวลาเปิดปิดพร้อมรีเลย์ สต็อกไทยส่งไว
รหัสสินค้า AT02283
หมวดหมู่ Thermostat
ราคา 290.00 บาท
ลงสินค้า 25 เม.ย. 2562
อัพเดทล่าสุด 19 ก.ค. 2565
ขออภัย สินค้าหมด
บัตรประชาชน
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
สินค้ารับประกัน 30 วัน
Multi Function Time Relay XY-WJ01 โมดูลตั้งเวลาเปิดปิดพร้อมรีเลย์ โดยที่โมดูลสามารถตั้งค่าได้หลากหลาย ใช้ไฟเลี้ยง 12VDC. ตัวรีเลย์สามารถใช้งานได้ทั้งไฟ AC และ DC โดยขับกระแสได้สูงสุด 10A



Material:ABS + electronic components
Working voltage:6--30 V power supply
Trigger signal source:high level touch (3.0V~24V), low level trigger (0.0V~0.2V), switching quantity control (passive switch). 3: Output capacity: can control devices within 30v 10A or within 220v5A
Quiescent current:15 mA
Working current:50 mA
Service life:more than 100,000 times
Working temperature:-40-85 ° C
Weight:45 g
Size:7.1*3.9*2.5 cm (length, width and height)
Package list:1*1pcs
Principle:time relay
Protective features:sealed
Liaison load:low power
Power mode:DC
 
Features:
This product lcd display, very clear, simple and easy to use, powerful, but please read user instructions carefully before using.
Product Highlights:
1.Display with LCD two columns, Can display parameters directly;
2.Trigger mode: high and low level,switch quantity.meet most of the needs.
3.Power supply: 6~30V.
4.Parameters can be modified via UART.
5.Stop button to provide emergency stop function.
6.5 minutes without any operation into a low-power state. Any action wake up.
7.OP/CL/LOP params can be modified individually
8.All parameters are automatically saved by power off.


Working Mode Introduction(P1~P7)
P0: After the signal is triggered, the relay conduction in OP time then disconnects; In the OP time, the signal is invalid.
P1: After the signal is triggered, the relay conduction in OP time then disconnects; In the OP time, the signal triggers a new timer.
P2: After the signal is triggered, the relay conduction in OP time then disconnects; In the OP time, signal trigger reset timer, relay disconnected and stop timing.
P3: After the signal is triggered, the relay disconnects the CL time, and then the relay conduction.
P4: After the signal is triggered, the relay conduction the OP time, and then the relay disconnects the CL time, and then loops the above action, gives the signal again in the loop, relays disconnect, stops the timer; and the number of cycles (LOP) can be set; End of cycle, keep relay disconnected;
P5: After the signal is triggered, the relay disconnects the CL time , and then the relay conduction the OP time, and then loops the above action, gives the signal again in the loop, relays conduction, stops the timer; and the number of cycles (LOP) can be set; End of cycle, keep relay conduction;
P6: No trigger signal after power-on, After the relay conduction OP time, the relay disconnects the CL time, and then loops the above action, signal is invalid in the loop, the number of cycles (LOP) can be set; End of cycle, keep relay disconnected;
P6: No trigger signal after power-on, After the relay disconnects the CL time, the relay conduction OP time, and then loops the above action, signal is invalid in the loop, the number of cycles (LOP) can be set; End of cycle, keep relay conduction; 
P8: Signal hold function: The signal is maintained, the timing is cleared, and the relay conduction; when the signal disappears, the relay disconnects after the timing OP; during the timing, there is another signal and the timing is cleared;
P9: Signal hold function: The signal is maintained, the timing is cleared, and the relay disconnected; when the signal disappears, the relay conduction after the timing CL; during the timing, there is another signal and the timing is cleared;
(P0~P7) mode, short press the pause button, Start timing if the system is not timed; If the system is already timed, the system pauses the timer, the relay disconnected, flashing "out" to indicate a reminder;
P8/P9 mode, The pause button as a trigger signal in the Run interface, Short / Long press fail.
 
Specification :
Timing Range: 0.01 sec~9999 min
Power Supply: 6V~30V
Trigger signal source: High level(3.0V~24.0V), Low level(0.0V ~0.2V), Switch signal
Maxmum Output load: DC 30V 5A and AC 220V 5A
Static Current: 15mA Operating current: 50mA
Service life: more than 100,000 times; working temperature: -40-85°C
Optocoupler isolation, strong anti-interference ability, industrial grade circuit board, after power set parameters memory forever.
Size: 8x3.8x1.9cm/3.15x1.5x0.75inch
Color: Gray&balck

วิธีการสั่งซื้อสินค้า

วิธีการชำระเงิน

ราคาสินค้าหน้าเว็บรวมภาษีแล้ว

 

ค่าจัดส่งสินค้า ยอดสั่งซื้อต่ำกว่า 1000 บาท ค่าจัดส่งทาง EMS 50 บาท

                      ยอดสั่งซื้อ 1500 บาทขึ้นไป จัดส่งให้ฟรีทาง Kerry 
                   (ไม่รวมสินค้าหมวดหมู่DIY)

 

หลังจากสั่งซื้อและชำระเงินแล้ว จะต้องแจ้งชำระเงินทางหน้าเว็บเท่านั้น  หากไม่มีการแจ้งชำระเงินภายใน 72 ชม. ระบบจะยกเลิกคำสั่งซื้อโดยอัตโนมัติ หากท่านยังต้องการสั่งซื้อสินค้าอยู่ จะต้องทำการสั่งซื้อใหม่อีกครั้ง

 

      รายการที่แจ้งชำระเงินก่อนเวลา 15:00น. จะทำการจัดส่งในวันทำการเดียวกัน  รายการที่แจ้งชำระเงินหลัง 15:00น. จะจัดส่งในวันทำการถัดไป  จะทำการจัดส่งทุกวัน จันทร์-ศุกร์

      ***เฉพาะบริการจัดส่งKerryแจ้งยอดชำระก่อนเวลา10:30น. จะจัดส่งในวันทำการเดียวกัน
Kerryจัดส่งวันจันทร์-ศุกร์เท่านั้น

      *เฉพาะวันเสาร์ รายการที่แจ้งชำระเงินก่อนเวลา 10:00น. จะทำการจัดส่งในวันทำการเดียวกัน  รายการที่แจ้งชำระเงินหลัง 10:00น. จะจัดส่งในวันทำการถัดไป  

 

      หลังจากชำระเงินแล้ว คลิ๊กที่นี่ เพิ่อแจ้งชำระเงินทันที  หากไม่สะดวกในการแนบหลักฐานการโอนเงิน กรุณาแจ้งชื่อธนาคาร และเวลาโอนเงินที่ถูกต้อง หากไม่สะดวกในการเข้าหน้าเว็บจริงๆ สามารถส่งหลักฐานการโอนเงินมาได้ทาง Official Line ID :  @analogread   




 2.ชำระเงินผ่าน QR-CODE ฟรีค่าธรรมเนียม ทุกกรณี

...เลือกธนาคารที่แจ้งชำระเงินเป็น >>>>>>พร้อมเพย์<<<<<< หากมีค่าธรรมเนียมเกิดขึ้นทางเราจะใส่กลับคืนไปในกล่องพร้อมกับสินค้า


 

เลือกช่องทางที่คุณสะดวก เพื่อชำระเงินให้ร้านค้าโดยตรง หากมีข้อสงสัย กรุณา ติดต่อเรา

โอนเงินบัญชีธนาคาร
ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาเซ็นทรัลเฟสติวัล หาดใหญ่ ออมทรัพย์
พร้อมเพย์ สาขา- -
บัญชีออนไลน์
  • ค่าธรรมเนียม 3.9% + 11 THB
  • การชำระผ่าน PayPal คุณไม่จำเป็นต้องแจ้งชำระเงิน เนื่องจากระบบจะจัดการให้คุณทันที ที่คุณชำระเงินเสร็จสมบูรณ์

เลือกช่องทางที่คุณสะดวก เมื่อชำระเงินเรียบร้อย คุณจะได้รับอีเมลยืนยันการชำระเงินทุกครั้ง (LnwPay ไม่มีค่าธรรมเนียมเพิ่มเติม อ่านรายละเอียด)

บัตรเครดิต / บัตรเดบิต
คุณสามารถชำระเงินด้วยบัตรเครดิต (Credit card) หรือ บัตรเดบิต (Debit Card) ได้ทุกธนาคารและสถาบันการเงิน ที่มีสัญลักษณ์ VISA, MASTERCARD, JCB
หมายเหตุ: สำหรับการชำระด้วยบัตรเดบิต (Debit Card) จำเป็นต้องสมัครใช้บริการจากธนาคารก่อนชำระเงิน ดูวิธีสมัคร ธ.กสิกร | ธ.กรุงเทพ | ธ.กรุงไทย
ดำเนินการต่อเมื่อกดปุ่มนี้ ระบบจะพาคุณไปยังเว็บไซต์ LnwPay
แอพพลิเคชั่นธนาคาร
อีกก้าวของความสะดวกสบาย ให้คุณชำระเงินผ่าน แอพพลิเคชั่นธนาคารบนมือถืออย่าง K PLUS ของธนาคารกสิกรไทย เพียงกรอกเบอร์มือถือ ระบบจะส่งการแจ้งเตือนผ่านแอพ และกดชำระเงินได้ทันที
เลือกช่องทางที่ท่านต้องการชำระผ่าน:
K PLUS App
ดำเนินการต่อ เมื่อกดปุ่มนี้ ระบบจะพาคุณไปยังเว็บไซต์ LnwPay
อินเตอร์เน็ตแบงค์กิ้ง
บริการที่จะให้คุณชำระเงินค่าสินค้าได้อย่างง่ายดาย เพียงเข้าสู่ระบบบริการ i-Banking, e-Banking ของธนาคาร โดยคุณไม่จำเป็นต้องใส่รหัสร้านค้าให้วุ่นวาย เพียงเข้าสู่ระบบจากนั้นเลือกบัญชีที่ต้องการชำระ รับ SMS สำหรับ OTP และชำระเงินได้ทันที
เลือกช่องทางที่ท่านต้องการชำระผ่าน:
ธนาคารไทยพาณิชย์
ธนาคารกรุงเทพ
ธนาคารกรุงศรีฯ
ดำเนินการต่อ เมื่อกดปุ่มนี้ ระบบจะพาคุณไปยังเว็บไซต์ LnwPay
เงินสดผ่านเคาน์เตอร์
ชำระเงินผ่านเคาน์เตอร์ ผ่านจุดรับชำระเงินทั่วประเทศ สามารถจ่ายเงินได้ที่ 7-Eleven ทุกสาขา (ผ่าน Counter Service)
เลือกช่องทางที่ท่านต้องการชำระผ่าน:
Counter Service
ดำเนินการต่อ เมื่อกดปุ่มนี้ ระบบจะพาคุณไปยังเว็บไซต์ LnwPay
บัญชีออนไลน์
คุณสามารถชำระเงินผ่านบัญชีออนไลน์ที่คุณใข้บริการ ทั้ง truemoney Wallet และ LINE Pay โดยคุณสามารถเลือกตัดยอดเงินได้ทันที หรือจะชำระผ่านช่องทางต่างๆ ที่ผู้ให้บริการนั้นรองรับก็ได้เช่นกัน
เลือกช่องทางที่ท่านต้องการชำระผ่าน:
TrueMoney
LINE Pay
ดำเนินการต่อ เมื่อกดปุ่มนี้ ระบบจะพาคุณไปยังเว็บไซต์ LnwPay

นโยบายการเปลี่ยนหรือคืนสินค้า

*** สินค้ารับประกัน 30 วัน ***

สถิติร้านค้า

หน้าที่เข้าชม7,125,785 ครั้ง
ผู้ชมทั้งหมด2,822,683 ครั้ง
เปิดร้าน15 ก.ย. 2557
ร้านค้าอัพเดท6 ก.ย. 2568

อุปกรณ์ Arduino

เช็คสถานะสินค้า


ติดตามสินค้า

ระบบสมาชิก

ติดต่อเรา

พูดคุย-สอบถาม