STM32F411CEU6 Development board

STM32F411CEU6 Development board
STM32F411CEU6 Development boardSTM32F411CEU6 Development boardSTM32F411CEU6 Development boardSTM32F411CEU6 Development boardSTM32F411CEU6 Development board
รหัสสินค้า AT19074
หมวดหมู่ STM32
ราคา 300.00 บาท
ลงสินค้า 7 พ.ค. 2564
อัพเดทล่าสุด 19 พ.ย. 2564
ขออภัย สินค้าหมด
บัตรประชาชน
บุ๊คแบ๊งค์
คุ้มครองโดย LnwPay
สินค้ารับประกัน 30 วัน
The STM32F411XC/XE devices are based on the high-performance ARM® Cortex® -M4 32-bit RISC core operating at a frequency of up to 100 MHz. The Cortex®-M4 core features a Floating point unit (FPU) single precision which supports all ARM single-precision dataprocessing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.
The STM32F411xC/xE belongs to the STM32 Dynamic Efficiency
product line (with products combining power efficiency, performance and integration) while adding a new innovative feature called Batch Acquisition Mode (BAM) allowing to save even more power consumption during data batching.
The STM32F411xC/xE incorporate high-speed embedded memories (up to 512 Kbytes of Flash memory, 128 Kbytes of SRAM), and an extensive range of enhanced I/Os and peripherals connected to two APB buses, two AHB bus and a 32-bit multi-AHB bus matrix.
All devices offer one 12-bit ADC, a low-power RTC, six general-purpose 16-bit timers including one PWM timer for motor control, two general-purpose 32-bit timers. They also feature standard and advanced communication interfaces.

The STM32F411xC/xE operate in the - 40 to + 125 °C temperature range from a 1.7 (PDR OFF) to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.
These features make the STM32F411xC/xE microcontrollers suitable for a wide range of applications:
Features
• Dynamic Efficiency Line with BAM (BatchAcquisition Mode)
    – 1.7 V to 3.6 V power supply
    – - 40°C to 85/105/125 °C temperature range
• Core: ARM® 32-bit Cortex®-M4 CPU withFPU, Adaptive real-time accelerator  (ARTAccelerator™) allowing 0-wait state execution from Flash memory, frequency up to 100 MHz, memory protection unit, 125 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions
• Memories
   – Up to 512 Kbytes of Flash memory
   – 128 Kbytes of SRAM
• Clock, reset and supply management
   – 1.7 V to 3.6 V application supply and I/Os
   – POR, PDR, PVD and BOR
   – 4-to-26 MHz crystal oscillator
   – Internal 16 MHz factory-trimmed RC
   – 32 kHz oscillator for RTC with calibration
   – Internal 32 kHz RC with calibration
• Power consumption
   – Run: 100 µA/MHz (peripheral off)
   – Stop (Flash in Stop mode, fast wakeup time): 42 µA Typ @ 25C; 65 µA max @25 °C
   – Stop (Flash in Deep power down mode, slow wakeup time): down to 9 µA @ 25 °C; 28 µA max @25 °C
   – Standby: 1.8 µA @25 °C / 1.7 V without RTC; 11 µA @85 °C @1.7 V
   – VBAT supply for RTC: 1 µA @25 °C
• 1×12-bit, 2.4 MSPS A/D converter: up to 16 channels
• General-purpose DMA: 16-stream DMA controllers with FIFOs and burst support
• Up to 11 timers: up to six 16-bit, two 32-bit timers up to 100 MHz, each with up to four IC/OC/PWM or pulse counter and quadrature (incremental) encoder input, two watchdog timers (independent and window) and a SysTick timer
• Debug mode
   – Serial wire debug (SWD) & JTAG interfaces
   – Cortex®-M4 Embedded Trace Macrocell™
• Up to 81 I/O ports with interrupt capability
   – Up to 78 fast I/Os up to 100 MHz
   – Up to 77 5 V-tolerant I/Os
• Up to 13 communication interfaces
   – Up to 3 x I2C interfaces (SMBus/PMBus)
   – Up to 3 USARTs (2 x 12.5 Mbit/s, 1 x 6.25 Mbit/s), ISO 7816 interface, LIN, IrDA, modem control)
   – Up to 5 SPI/I2Ss (up to 50 Mbit/s, SPI or I2S audio protocol), SPI2 and SPI3 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock
   – SDIO interface (SD/MMC/eMMC)
   – Advanced connectivity: USB 2.0 full-speed device/host/OTG controller with on-chip PHY
• CRC calculation unit
• 96-bit unique ID
• RTC: subsecond accuracy, hardware calendar
• All packages (WLCSP49, LQFP64/100, UFQFPN48, UFBGA100) are ECOPACK®2


วิธีการสั่งซื้อสินค้า

วิธีการชำระเงิน

ราคาสินค้าหน้าเว็บรวมภาษีแล้ว

 

ค่าจัดส่งสินค้า ยอดสั่งซื้อต่ำกว่า 1000 บาท ค่าจัดส่งทาง EMS 50 บาท

                      ยอดสั่งซื้อ 1500 บาทขึ้นไป จัดส่งให้ฟรีทาง Kerry 
                   (ไม่รวมสินค้าหมวดหมู่DIY)

 

หลังจากสั่งซื้อและชำระเงินแล้ว จะต้องแจ้งชำระเงินทางหน้าเว็บเท่านั้น  หากไม่มีการแจ้งชำระเงินภายใน 72 ชม. ระบบจะยกเลิกคำสั่งซื้อโดยอัตโนมัติ หากท่านยังต้องการสั่งซื้อสินค้าอยู่ จะต้องทำการสั่งซื้อใหม่อีกครั้ง

 

      รายการที่แจ้งชำระเงินก่อนเวลา 15:00น. จะทำการจัดส่งในวันทำการเดียวกัน  รายการที่แจ้งชำระเงินหลัง 15:00น. จะจัดส่งในวันทำการถัดไป  จะทำการจัดส่งทุกวัน จันทร์-ศุกร์

      ***เฉพาะบริการจัดส่งKerryแจ้งยอดชำระก่อนเวลา10:30น. จะจัดส่งในวันทำการเดียวกัน
Kerryจัดส่งวันจันทร์-ศุกร์เท่านั้น

      *เฉพาะวันเสาร์ รายการที่แจ้งชำระเงินก่อนเวลา 10:00น. จะทำการจัดส่งในวันทำการเดียวกัน  รายการที่แจ้งชำระเงินหลัง 10:00น. จะจัดส่งในวันทำการถัดไป  

 

      หลังจากชำระเงินแล้ว คลิ๊กที่นี่ เพิ่อแจ้งชำระเงินทันที  หากไม่สะดวกในการแนบหลักฐานการโอนเงิน กรุณาแจ้งชื่อธนาคาร และเวลาโอนเงินที่ถูกต้อง หากไม่สะดวกในการเข้าหน้าเว็บจริงๆ สามารถส่งหลักฐานการโอนเงินมาได้ทาง Official Line ID :  @analogread   




 2.ชำระเงินผ่าน QR-CODE ฟรีค่าธรรมเนียม ทุกกรณี

...เลือกธนาคารที่แจ้งชำระเงินเป็น >>>>>>พร้อมเพย์<<<<<< หากมีค่าธรรมเนียมเกิดขึ้นทางเราจะใส่กลับคืนไปในกล่องพร้อมกับสินค้า


 

เลือกช่องทางที่คุณสะดวก เพื่อชำระเงินให้ร้านค้าโดยตรง หากมีข้อสงสัย กรุณา ติดต่อเรา

โอนเงินบัญชีธนาคาร
ธนาคารไทยพาณิชย์ จำกัด (มหาชน) สาขาเซ็นทรัลเฟสติวัล หาดใหญ่ ออมทรัพย์
พร้อมเพย์ สาขา- -
บัญชีออนไลน์
  • ค่าธรรมเนียม 3.9% + 11 THB
  • การชำระผ่าน PayPal คุณไม่จำเป็นต้องแจ้งชำระเงิน เนื่องจากระบบจะจัดการให้คุณทันที ที่คุณชำระเงินเสร็จสมบูรณ์

เลือกช่องทางที่คุณสะดวก เมื่อชำระเงินเรียบร้อย คุณจะได้รับอีเมลยืนยันการชำระเงินทุกครั้ง (LnwPay ไม่มีค่าธรรมเนียมเพิ่มเติม อ่านรายละเอียด)

บัตรเครดิต / บัตรเดบิต
คุณสามารถชำระเงินด้วยบัตรเครดิต (Credit card) หรือ บัตรเดบิต (Debit Card) ได้ทุกธนาคารและสถาบันการเงิน ที่มีสัญลักษณ์ VISA, MASTERCARD, JCB
หมายเหตุ: สำหรับการชำระด้วยบัตรเดบิต (Debit Card) จำเป็นต้องสมัครใช้บริการจากธนาคารก่อนชำระเงิน ดูวิธีสมัคร ธ.กสิกร | ธ.กรุงเทพ | ธ.กรุงไทย
ดำเนินการต่อเมื่อกดปุ่มนี้ ระบบจะพาคุณไปยังเว็บไซต์ LnwPay
แอพพลิเคชั่นธนาคาร
อีกก้าวของความสะดวกสบาย ให้คุณชำระเงินผ่าน แอพพลิเคชั่นธนาคารบนมือถืออย่าง K PLUS ของธนาคารกสิกรไทย เพียงกรอกเบอร์มือถือ ระบบจะส่งการแจ้งเตือนผ่านแอพ และกดชำระเงินได้ทันที
เลือกช่องทางที่ท่านต้องการชำระผ่าน:
K PLUS App
ดำเนินการต่อ เมื่อกดปุ่มนี้ ระบบจะพาคุณไปยังเว็บไซต์ LnwPay
อินเตอร์เน็ตแบงค์กิ้ง
บริการที่จะให้คุณชำระเงินค่าสินค้าได้อย่างง่ายดาย เพียงเข้าสู่ระบบบริการ i-Banking, e-Banking ของธนาคาร โดยคุณไม่จำเป็นต้องใส่รหัสร้านค้าให้วุ่นวาย เพียงเข้าสู่ระบบจากนั้นเลือกบัญชีที่ต้องการชำระ รับ SMS สำหรับ OTP และชำระเงินได้ทันที
เลือกช่องทางที่ท่านต้องการชำระผ่าน:
ธนาคารไทยพาณิชย์
ธนาคารกรุงเทพ
ธนาคารกรุงศรีฯ
ดำเนินการต่อ เมื่อกดปุ่มนี้ ระบบจะพาคุณไปยังเว็บไซต์ LnwPay
เงินสดผ่านเคาน์เตอร์
ชำระเงินผ่านเคาน์เตอร์ ผ่านจุดรับชำระเงินทั่วประเทศ สามารถจ่ายเงินได้ที่ 7-Eleven ทุกสาขา (ผ่าน Counter Service)
เลือกช่องทางที่ท่านต้องการชำระผ่าน:
Counter Service
ดำเนินการต่อ เมื่อกดปุ่มนี้ ระบบจะพาคุณไปยังเว็บไซต์ LnwPay
บัญชีออนไลน์
คุณสามารถชำระเงินผ่านบัญชีออนไลน์ที่คุณใข้บริการ ทั้ง truemoney Wallet และ LINE Pay โดยคุณสามารถเลือกตัดยอดเงินได้ทันที หรือจะชำระผ่านช่องทางต่างๆ ที่ผู้ให้บริการนั้นรองรับก็ได้เช่นกัน
เลือกช่องทางที่ท่านต้องการชำระผ่าน:
TrueMoney
LINE Pay
ดำเนินการต่อ เมื่อกดปุ่มนี้ ระบบจะพาคุณไปยังเว็บไซต์ LnwPay

นโยบายการเปลี่ยนหรือคืนสินค้า

*** สินค้ารับประกัน 30 วัน ***

สถิติร้านค้า

หน้าที่เข้าชม7,144,346 ครั้ง
ผู้ชมทั้งหมด2,841,244 ครั้ง
เปิดร้าน15 ก.ย. 2557
ร้านค้าอัพเดท15 ต.ค. 2568

อุปกรณ์ Arduino

เช็คสถานะสินค้า


ติดตามสินค้า

ระบบสมาชิก

ติดต่อเรา

พูดคุย-สอบถาม