รหัสสินค้า | AT02177 |
หมวดหมู่ | วัดสภาพอากาศ |
ราคา | 2,090.00 บาท |
ลงสินค้า | 26 พ.ย. 2559 |
อัพเดทล่าสุด | 24 ม.ค. 2567 |
Wind Speed Sensor เป็นเซนเซอร์วัดความเร็วลมที่ให้ Output เป็นแบบ analog 0 ~ 5VDC และแบบ 4 ~ 20mA สามารถวัดความลมได้ตั้งแต่ 0 ~ 30m/s ความละเอียดในการวัด 0.1 m/s ใช้ไฟเลี้ยง 9 ~ 24VDC สามารถทำงานได้ที่อุณหภูมิ -40 - 80 องศาเซลเซียส
Specifications :
Style: three cups
Material: aluminium alloy
The mode of its output signal:0-5V(Voltage signal)/ 4 ~ 20mA
supply voltage: DC 9-24V
Power consumption:Voltage MAX≤0.3W
Start wind speed:0.4-0.8m/s
resolution:0.1m/s
Effective wind speed measurement range:0-30m/s
System error:±3%
Transmission distance:More than 1000m
Transmission medium:Cable transmission
Connection mode:Three wire system
Working temperature:-40℃~80℃
Working humidity: 35%~85%
Feature :
High hardness
Corrosion protection
Waterproofness
High precision
Connection Diagram
Please make the external power (DC 9-24V) and the wiring to Arudino in same ground, i.e. connect GND to arduino as well as to external power's GND. In the diagram, it was not indicated out.
Red ------ +9-24V
Black ---- GND
Yellow --- voltage signal
Blue ----- current signal
/*
Connect the voltage signal wire to Arduino analog interface:
Yellow CableA0
*/
void setup()
{
Serial.begin(9600);
}
void loop()
{
int sensorValue = analogRead(A0);
float outvoltage = sensorValue * (5.0 / 1023.0);
Serial.print("outvoltage = ");
Serial.print(outvoltage);
Serial.println("V");
int Level = 6*outvoltage;//The level of wind speed is proportional to the output voltage.
Serial.print("wind speed is ");
Serial.print(Level);
Serial.println(" level now");
Serial.println();
delay(500);
}
Wind Speed | Value |
---|---|
1 | 0.17 |
2 | 0.33 |
3 | 0.5 |
4 | 0.67 |
5 | 0.83 |
6 | 1 |
7 | 1.17 |
8 | 1.33 |
9 | 1.5 |
10 | 1.67 |
11 | 1.83 |
12 | 2 |
13 | 2.17 |
14 | 2.33 |
15 | 2.5 |
16 | 2.67 |
17 | 2.83 |
18 | 3 |
19 | 3.17 |
20 | 3.33 |
21 | 3.6 |
22 | 3.67 |
23 | 3.83 |
24 | 4 |
25 | 4.17 |
26 | 4.33 |
27 | 4.5 |
28 | 4.67 |
29 | 4.83 |
30 | 5 |
Formula: V=6*U
ค่าจัดส่งสินค้า ยอดสั่งซื้อต่ำกว่า 1000 บาท ค่าจัดส่งทาง EMS 50 บาท
ยอดสั่งซื้อ 1500 บาทขึ้นไป จัดส่งให้ฟรีทาง Kerry
(ไม่รวมสินค้าหมวดหมู่DIY)
หลังจากสั่งซื้อและชำระเงินแล้ว จะต้องแจ้งชำระเงินทางหน้าเว็บเท่านั้น หากไม่มีการแจ้งชำระเงินภายใน 72 ชม. ระบบจะยกเลิกคำสั่งซื้อโดยอัตโนมัติ หากท่านยังต้องการสั่งซื้อสินค้าอยู่ จะต้องทำการสั่งซื้อใหม่อีกครั้ง
รายการที่แจ้งชำระเงินก่อนเวลา 15:00น. จะทำการจัดส่งในวันทำการเดียวกัน รายการที่แจ้งชำระเงินหลัง 15:00น. จะจัดส่งในวันทำการถัดไป จะทำการจัดส่งทุกวัน จันทร์-ศุกร์
***เฉพาะบริการจัดส่งKerryแจ้งยอดชำระก่อนเวลา10:30น. จะจัดส่งในวันทำการเดียวกัน
Kerryจัดส่งวันจันทร์-ศุกร์เท่านั้น
*เฉพาะวันเสาร์ รายการที่แจ้งชำระเงินก่อนเวลา 10:00น. จะทำการจัดส่งในวันทำการเดียวกัน รายการที่แจ้งชำระเงินหลัง 10:00น. จะจัดส่งในวันทำการถัดไป
หลังจากชำระเงินแล้ว คลิ๊กที่นี่ เพิ่อแจ้งชำระเงินทันที หากไม่สะดวกในการแนบหลักฐานการโอนเงิน กรุณาแจ้งชื่อธนาคาร และเวลาโอนเงินที่ถูกต้อง หากไม่สะดวกในการเข้าหน้าเว็บจริงๆ สามารถส่งหลักฐานการโอนเงินมาได้ทาง Official Line ID : @analogread
2.ชำระเงินผ่าน QR-CODE ฟรีค่าธรรมเนียม ทุกกรณี
เลือกช่องทางที่คุณสะดวก เพื่อชำระเงินให้ร้านค้าโดยตรง หากมีข้อสงสัย กรุณา ติดต่อเรา
เลือกช่องทางที่คุณสะดวก เมื่อชำระเงินเรียบร้อย คุณจะได้รับอีเมลยืนยันการชำระเงินทุกครั้ง (LnwPay ไม่มีค่าธรรมเนียมเพิ่มเติม อ่านรายละเอียด)
หน้าที่เข้าชม | 7,125,785 ครั้ง |
ผู้ชมทั้งหมด | 2,822,683 ครั้ง |
เปิดร้าน | 15 ก.ย. 2557 |
ร้านค้าอัพเดท | 6 ก.ย. 2568 |